Whether you’re a beginner or advanced golfer, if you want to hit a golf ball farther and straighter, you need to learn how to hit a draw in golf. But because it’s not a natural swing, it’s hard to master. You might think that hitting a draw in golf is just swinging the club across your body. But in fact, there’s much more to it than that and if you don’t practice it right, you won’t see any improvement.
If you are a golfer, you’ve likely experienced the dreaded slice, the ball flight that sees your shot curve in an unwanted way.
Though it’s not always ideal, there’s nothing inherently wrong with hitting a slice, but many golfers dream of being able to draw the ball like their favorite pros do. (A “draw” in golf is basically the opposite of a slice, it curves in a much more pleasant way and can actually increase your distance.)
The good news is that there’s a way to turn that slice into a draw by making a few simple, small changes to your game. And we can help. This article will focus on what you need to know about hitting a draw, and how you can use that knowledge to boost your game and enjoy yourself on the course even more.
What is a draw in a golf?
A draw in a golf is a ball flight in which the initial direction of the ball is left-to-right of the target, but then finishes right-to-left. It’s important to know that a draw will never land to the left of its initial aim; it will only start that way and then finish to the right.
Draws are typically considered a more advanced shot in golf, and we’ve got some tips below on how you can hit one yourself.
A draw differs from a hook in that a hook starts right-to-left and continues to do so all the way to the ground. A hook also starts farther out to the side than does a draw. You may read also how to organize 14 divider golf bag
How to hit a draw in Golf with driver
A draw is a desirable shot for many golfers because it provides more distance and control. However, hitting a draw with a driver can be tricky. It requires proper alignment, timing and even some body mechanics to help you execute the shot successfully.
The key to hitting a draw with your driver is keeping the clubface square as long as possible in your backswing, then releasing it at impact to help the ball curve from right to left (for right-handers). This can be difficult because the driver is the longest club in your bag, so it naturally wants to swing outside-to-in on the downswing.
Here are six tips that will help you learn how to hit a draw with your driver:
- Control the clubface: If you can control where the clubface points, you’ll have much better control of where the ball goes. One of the best ways to do that is by rotating your forearms on both sides of your swing, before and after impact. Keep them rotating through impact, then rotate them again once you reach your follow-through position. This will keep you more connected during your swing and give you more control over the clubface’s position at impact.
- Keep it square on the backswing: Draws are straight shots that curve from right to left (for a right-handed golfer). You want to start your ball out straight, then have it curve at the end of its flight path. To do this, keep your clubface square through impact.
- Use your hips: You need some extra power if you’re going to hit a draw with your driver. The best way to add power is by using your hips. Make sure you turn them fully on your backswing and allow them to open up naturally on your downswing.
- Swing inside-to-out: To get the proper draw curve on your drive, you need an inside-to-out swing path. This means that at impact, your clubhead approaches the ball from inside the target line and exits outside of it (relative to the ball). It’s important not to cut across the ball too much or you’ll end up hitting a big slice instead of a draw.
- Use your hips: On the takeaway and downswing, I rotate my hips to the right, opening them up to the target line. That gets my body in sync with my shoulders and arms and helps me stay connected and make solid contact with the ball.
- Swing inside-to-out: When I swing down, I’ll have a good angle of attack where I’m swinging slightly inside-out and still descending into the ball. That creates a draw spin on the ball. Also, if you’re hitting up on it, you’ll get more backspin. So you want to come into it slightly down for a higher launch and maximum carry.
- Finish strong: Along with the inside-in path, a strong finish with your hips and shoulders facing forwards toward your target and not way open, will help ensure you’re hitting a draw. If you get too far open at impact, you’ll most likely be cutting across the ball, which will lead to hooks and inconsistent ballstriking. You should feel like you’re “coiling” into your right hip at impact and finishing with some weight on your front foot.
- Stay connected: When it comes to hitting a draw, everything starts with setup. If you can properly aim yourself at the target and make sure your hands are in front of the ball at address, then you’ve already taken steps toward hitting that coveted draw. You also want to make sure your upper body stays in sync with your lower body throughout the swing.
Remember that, The ball position to hit a draw with driver is in the middle of your stance. It shouldn’t be too far forward or too far back. Also, make sure that it is aligned with the inside part of your left heel (for right-handed golfers). If you are a left-handed golfer, align it with the inside part of your right heel.
How to hit a draw in golf with irons
The key to hitting a draw with your irons is to use the same swing path you’d use when hitting a fade, but aim left. Here are three things to pay attention to that will help you how to hit a draw in golf with your irons:
- Find the right setup: In order to hit a draw, you must make sure that your clubface is open at impact, which means the face of the club points left of the target. So, to set up for a draw, ensure that you are positioned with your feet and hips aimed just left of your target. Once you’re in position, try to visualize swinging along the line where your feet and hips are aimed.
- Swing on an inside-out path: It’s important that you swing on an outside-to-inside path (it’s called a downswing path) if you want to consistently hit a draw. A good way to do this is to focus on trying to swing your left shoulder over your right foot through impact (if you’re right-handed). If you do this correctly, it will cause your clubface to be open at impact and lead to a nice draw.
- Rotate, don’t sway: Swaying over-rotates the body and forces you to compensate by flipping your hands and arms through impact, which usually causes a pull or push. Let your weight shift toward the target on your backswing, then shift it toward the target in your downswing. Don’t let it slide off the ball of your foot at any point in the swing. This keeps your body rotating instead of swaying.
- Don’t flip your hands: Flipping your hands will cause a slice or pull. Instead, feel like you’re releasing the club by turning both forearms over (left forearm for right-handers) through impact and letting the club swing past your hands and arms. The result is a more centered impact position and an easier draw.
How to Practice Draw Shots with Swing Align
Have you ever wondered how to hit a draw in golf? If so, then you are in the right place. In this article, we will explain the ins and outs of hitting a draw.
The draw shot is arguably one of the most sought-after shots in golf. When executed correctly, it can produce low scores and make golf more fun. Despite its benefits, many golfers struggle to hit a draw. Here’s why:
In order to hit a draw every time, one must understand what causes a ball to draw. The easiest way for readers to understand what causes a ball to draw is by using the Swing Align training aid.
Swing Align is a training aid that attaches to your club and gives immediate feedback on where your clubface is when making contact with the ball. It has been proven to improve golfers’ ball striking, which produces better results on the course. Learn what are the 14 clubs in a golf bag
How to hit a draw and fade
If you intend to hit a draw or a fade, you will have to make sure that you are swinging the appropriate way. Before we begin to look at how to swing, however, it is important to understand what a draw and a fade are.
A draw is when the ball starts right of where you’re aiming, then curves back to the left using the hook spin. A fade is when the ball starts left of where you’re aiming, then curves back to the right using a slice spin. You can determine which shot you want by choosing your target line on the range before hitting your shot. This will help you learn whether you are curving left or right.
Once you know how you’re curving, it’s time to find out how much. The best way to do this is by using alignment rods on both sides of your ball. By aiming for the center of these rods, each rod will tell you which direction your ball is going. Using this method, it’s also easy to see if you curve too much or too little. You may check the ultimate guide on How Long Does It Take to Play 18 Holes of Golf
Conclusion
The draw is a golf shot that can give you a competitive edge over your opponents. This is because it allows you to keep the ball lower and get a few more yards out of each swing. And now that you know how to hit a draw in golf, you can start getting an edge on your opponents too.
We hope this guide has helped you learn everything about hitting the perfect draw. If you’re ready to take your game to the next level, check out our other articles on how to improve every part of your game.
